In today’s BLOG post and YouTube video I show you step by step how to install the Dexter Nev-R Adjust brakes on your Airstream. This is a simple DIY repair that requires a few simple tools 🛠️ and just a little time.
Below is the list of tools you will need as well as an Amazon link to purchase the Dexter brake assembly for your RV. Let me know if you have any questions and don’t forget to Like & Subscribe so you never miss a video.
Required Tools 🛠️
Floor Jack or Bottle Jack
Jack Stand
1 7/16 socket
14 mm socket
Ratchet set
Torque wrench
Wire strippers
Wire connectors
Heat gun
Impact gun
Zip ties
Flat screwdriver
Rubber Mallet
Pry Bar
Gloves
Rags
Blue Loctite
Amazon Link 🔗
PRO TIP ℹ️
Once you get these brakes installed, you'll need to break them in. First, find a long stretch of road or a big, empty parking lot. Once you're there, set your brake controller to its maximum setting and get moving. Speed up to about 40 mph and brake to slow to about 20 mph. Repeat this 15-30 times. The goal is to get the brake shoes and magnet properly seated into your drum. You'll know you've done that when it feels less jerky (and more consistent) each time you apply the brakes.
CONCLUSION
With a few common tools and a little time, this is a simple DIY maintnenace task that most Airstream owners can complete. However, if you are not sure of your ability to complete this task, please seek assistance from a trained and certified RV technician. Finally, let us know if you have any questions and don’t forget to sign-up for our newsletter so you never miss a BLOG post and subscribe to out YouTube channel so you never miss a video upload.
Happy Camping & Safe Travels,
Rick & Lisa
The Wright Life
Comments